Monitoring
* Statistics Overview
* Detailed Statistics
Maintenance
* Restart
* Factory Default
* Smart Boot
* Software Upload
On the left side, the main menu tree for web is listed in the page. According to the function
name in boldface, all functions can be divided into three parts, including “Configuration”,
“Monitoring” and “Maintenance”. The functions of each folder are described in its
corresponded section respectively. As to the function names in normal type are the
sub-functions. When clicking it, the function is performed. The following list is the main
function tree for web user interface.
Configuration
Monitorin
Maintenance
Root
To restore the default Values of switch, Click the “Factory Default” Button. If you want to
restart the switch, click the “Restart” Button. To check the connection status of each port
from 1 to 16/24, take a look at the “Status”. To know the detail statistics of one port, click
8
To Next Page
Loading...
