Micronics U3000 User Manual

U3000/U4000 User Manual i
(Issue 2.0)
Table of Contents
1: General Description 1
1.1 Introduction 1
1.2 Principles of Operation 2
1.3 Supplied Hardware 3
1.4 U3000/U4000 Instrument 4
1.4.1 Connections 4
1.4.2 Keypad 5
1.4.3 Power supply 6
1.4.4 Expansion modules (U4000 only) 6
2: Installation 7
2.1 Safety Precautions and Warnings 7
2.2 Installing the U3000/U4000 instrument 7
2.2.1 Positioning the instrument 7
2.2.2 Mounting the instrument 7
2.2.3 Connecting the instrument 9
2.3 Installing The Ultrasonic Transducers 10
2.3.1 Transducer positioning 10
2.3.2 Preparation 11
2.3.3 Transducer attachment 11
2.3.4 Attaching the guide rail to the pipe 12
2.3.5 Fitting the transducers 12
2.4 Installing the USB Virtual Com. Port (U4000 only) 14
3: Operating Procedures 15
3.1 Setting-up the Instrument 16
3.1.1 Using the instrument for the first time 16
3.1.2 Enabling/disabling the backlight 17
3.1.3 Changing the user language 17
3.1.4 Changing the date and time 17
3.2 Using the Quick Start Menu 18
3.3 Instrument Calibration 21
3.3.1 Adjusting the zero cut-off 21
3.3.2 Adjusting the set zero flow offset 21
3.3.3 Adjusting the calibration factor 22
3.3.4 Adjusting the roughness factor 22
3.3.5 Adjusting the damping factor 23

Micronics U3000 Specifications

General

Brand	Micronics
Model	U3000
Category	Measuring Instruments
Language	English