Microsemi SyncServer S350 - Page 188

Tasks
DESCRIPTION
"Force authentication."
::= {ntpSystem 16}
ntpSysPktsReceived OBJECT-TYPE
SYNTAX INTEGER (0..32768)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is a rollover counter which reflects
the number of ntp packets received by the SyncServer.
It is valid for all versions of the SyncServer."
::= {ntpSystem 17}
ntpSysMode OBJECT-TYPE
SYNTAX INTEGER {
unspecified (0),
symactive (1),
sympassive (2),
client (3),
server (4),
broadcast (5),
reservedctl (6),
reservedpriv (7)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An integer indicating the NTP association mode
and are coded as follows:
============================================
0 unspecified
1 symmetric active
2 symmetric passive
3 client
4 server
5 broadcast
6 reserved for NTP control messages
7 reserved for private use
============================================"
::= {ntpSystem 18}
ntpSysVersion OBJECT-TYPE
SYNTAXDisplayString (SIZE(1..80))
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION"The version of the NTP daemon on the system."
::= {ntpSystem 19}
tymingStatus OBJECT-TYPE
SYNTAXDisplayString (SIZE(1..80))
MAX-ACCESSread-only
Page 188..........................................................................997-01520-02 Rev. F1