Microsemi SyncServer S350 - Page 189

Configuring SNMP
STATUScurrent
DESCRIPTION
"Indicates what status the Hardware Clock considers
itself to be as a timing source defined as follows:
============================================
Good HW Clock has a valid time reference.
BadHW Clock has no valid time reference.
============================================"
::= {tyming 1}
tymingSource OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time or frequency source currently in use
by the Hardware Clock defined as follows:
============================================
0 None
1 GPS
8 IRIG
16 External 1PPS
24 External 10MHz
31 Freerun
============================================"
::= {tyming 2}
tymingTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time according to the Hardware Clock in
the format of:
WWW MMM dd hh:mm:ss yyyy
defined as follows:
============================================
WWW weekday
MMM character month
ddday of month
hh:mm:sstime
yyyyyear
ExampleThu Sep 21 23:46:09 2006
============================================"
::= {tyming 3}
tymingVersion OBJECT-TYPE
997-01520-02 Rev. F1.......................................................................... Page 189