47
When performing cable test, press [TEST] and the LCD screen will display as follows:
From the LCD display screen, we can find out the total number of tests and the number of passes and
fails.
(3) Maximum capacitance: Can be set between 0.05u~1u; this value should be set to a great number
when the cables are longer in order to have stable tests.
(4) Test start method:
Automatic Starts test after test DUT is inserted.
Manual Starts test after the test DUT is inserted and the “Test” button is pressed.
Continuous Continuous tests after the “Test” button is pressed.
(5) Automatic test insert delay: This is only effective when Automatic is selected as the test start
method; its function is to wait a few seconds before starting the test after the test DUT is inserted.
(6) Number of continuous tests: This is only effective when Continuous is selected as the test start
To Next Page
Loading...
Need help?
General
