Microtest 8751 User Manual

46
The value displayed at the right of the screen is the unilateral test sensitivity; S5 unilateral offset can be
pressed and the value will change to zero after learning. S4 clears the unilateral offset value.
Press [Learn] after inserting the test DUT, the LCD screen will display as follows:
When test mode is being set, enter the value needed for the single side sensitivity.
P.S Use 80~90% of the minimum value learned as the setting value.

Microtest 8751 Specifications

General

Brand	Microtest
Model	8751
Category	Cable Tester
Language	English