T riang le V in th e d isp lay
I60
% m T S
V
W hen a sensor is touched, the
sy m b o ls o f th e fu nc tio n at w hich the
function selector is set w ill light up and
y ou can enter settings.
Touch the V or W sensor repeatedly
until triangle V is underneath the
sy mbol of the req uired function in the
display .
Then call up the function w ith the O K
sensor.
T riang le V w ill flash for approx .
5 seconds.
Y ou can only make entries w ith the V
or W sensors w hilst triangle V is
flashing.
If the triangle has stopped flashing,
y ou w ill need to select the function
again w ith the O K sensor.
The follow ing w ill change each time the
V or W is touched
–
D uration T and F inish time S in
increments of a minute,
–
the Minute minder time N at first in
increments of 5 seconds and then in
increments of a minute.
Touching the sensor for longer, speeds
up the change in the display .
C o ntro ls
19
To Next Page
Loading...
