,
The appliance must not be
operated until it has been correctly
installed in its housing unit.
O therw ise it poses an electric shock
haz ard.
Important. D o not fit insulation
material inside the housing unit.
This w ould hinder the intake of air to
the appliance.
W hen installing the appliance do not
lift it up by the door handle as this
can damage the door.
Turn off the mains electricity supply
to the isolator.
^
C onnect the mains cable from the
oven to the isolator.
^
P ush the appliance into the oven
housing unit and align it.
^ O pen the oven door and using tw o
screw s secure it to the side w alls of
the housing unit through the holes in
the oven trim.
Installing th e o v en
67
To Next Page
Loading...
