B efore the oven can be used, y ou
w ill need to
– release the controls by pressing
them in, if they are pushed in
w hen the oven is delivered.
– set the time of day .
T o set th e tim e o f d ay fo r th e
fir st tim e
The time can only be entered w hen
the function selector is at "0".
In the display :
– the clock sy mbol m w ill light up,
– and "I2 :00" and triangle V
underneath the m sy mbol w ill start
flashing.
I2:00
m
V
^
U se the V or W sensors to enter the
hour first of all.
^
Touch the O K sensor.
This confirms the hour and the minutes
w ill then start to flash.
^
Now use the V or W sensors to enter
the minutes.
^
Touch the O K sensor.
This confirms the minutes.
The time of day y ou have selected has
now been entered.
If there is a pow er cut, the appliance
w ill store the current time of day of
approx . 24 hours. If more than 24
hours have elapsed it w ill show "i2:00"
and w ill need to be re-set.
W hen pow er is restored the time of day
w ill flash in the display . If it is correct
press the O K sensor to confirm it.
C h ang ing th e tim e o f d ay
^
Touch the O K sensor.
^ U se the V or W sensors to enter the
hour first of all.
^ Touch the O K sensor.
^ Now use the V or W sensors to enter
the minutes.
^ Touch the O K sensor.
The time of day has been changed.
Befo re u sing fo r th e first tim e
22
To Next Page
Loading...
