W ith the aid of the follow ing guide, minor problems can be easily corrected
w ithout contacting Miele.
If y ou then can't solve the remedy y ourself, please call the Miele C ustomer
C ontact C enter.
,
O n no account open the appliance casing!
Installation, maintenance and repairs may only be carried out by a suitably
q ualified and competent person in strict accordance w ith current national and
local safety regulations.
R epairs and other w ork by unq ualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised w ork.
P ro b lem P o ssib le c au se and rem ed y
The display is dark. – C heck w hether the time of day display is set so that it
does not show in the display (see "S ettings % - P i").
– C heck w hether the mains fuse has tripped. If it has,
contact a q ualified electrician or the Miele C ustomer
C ontact C entre.
The oven does not
heat up.
– C heck w hether the sy stem lock has been activated.
– C heck w hether the mains fuse has tripped. If it has,
contact a q ualified electrician or the Miele C ustomer
C ontact C entre.
"i2:00" or the time of
day is flashing in
the display .
A ll pre-set times have been lost due to pow er cut.
R eset the times w ith the sensor buttons and press O K .
P re-set user programmes have to be reset.
A noise can be
heard after a
cooking process.
The cooling fan continues to run for a w hile after the oven
has been sw itched off to prevent any humidity building up
in the oven, on the control panel or on the oven housing
unit. W hen the temperature has fallen sufficiently , the fan
sw itches off automatically .
There are spots like
rust on the cataly tic
surfaces.
W hen roasting on the rack, the circulating air sometimes
picks up spices, w hich are then deposited on the oven
interior w alls. These residues are not removed by cataly tic
cleaning, and should be removed w hile fresh w ith a mild
solution of hot w ater and w ashing-up liq uid applied w ith a
soft brush.
P ro b lem so lv ing g u id e
59
To Next Page
Loading...
