Miele PFD 408 - Rinse Aid; Refill Indicator; Filling the Door Dispenser

Cleaning agent and rinsing agent
35
Rinse aid
Rinsing agent is necessary to ensure water
does not cling and leave marks on wash
items, and to help wash items dry faster af-
ter the final rinse.
The rinsing agent concentration must be ad-
justed in the following circumstances:
- If there are spots of water left on wash
items after reprocessing, then the dis-
pensing concentration is set too low.
- If clouding or smearing appears on wash
items after reprocessing, the dispensing
concentration is set too high.
The rinsing agent is dispensed in the Final
rinse program stage. The container needs to
be filled for this purpose.
In the Glasses program (depending on the
model), the final rinse is carried out with
cold water and without rinsing agent.
Refill indicator
When the fill level in the rinsing agent con-
tainer is low, you are reminded to refill the
dispensing canister, e.g.:

OK
Fill door dispenser with rinse aid.
 Confirm the prompt with OK and top up
the rinsing agent as described.
 Fill the dispensing path (see “Machine
functions”)
Filling the door dispenser
 Never add cleaning agent.
This will always destroy the rinsing agent
container!
Only fill the rinsing agent container with
rinsing agent for commercial dishwash-
ers.
 Open the door fully.
 Unscrew the yellow lid with
the symbol in the direction of the ar-
row.
The container holds approx. (10 oz) 300ml.
 Add rinsing agent only until it is up to the
“max.” mark on the edge of the funnel.