Miele PFD 408 - A0 Value Display; Dispensing Systems; Selecting a Dispensing System

Additional settings
68
A0 value display
The A
0
value is a standard known from
medical technology for the destruction of
microorganisms with moist heat
(cf.ISO15883); it is calculated from the
temperature and holding time.
The information “A
0
value” that is displayed
at the end of the program in this dishwasher
is calculated from the temperature in the
wash chamber and the corresponding hold-
ing time. The displayed value only gives an
indication, but doesn’t exactly fulfill the di-
rective ISO15883, as this dishwasher is not
a medical device.

08:15
Off
On
Display A0 value
- On
A0 value measuring is switched on and
the value is displayed at the end of the
program
- Off
A0 value measuring is switched off
 Select an option.
Dispensing systems
The following menu allows you to activate,
fill, and rinse dispensing systems, to change
their names if required, and to set the dis-
pensing concentration for all programs.
Depending on the model, various dispens-
ing systems are available for dispensing
process chemicals.
Cleaning agent and rinsing agent can be
dispensed either via a corresponding door
dispenser (cleaning agent, rinsing
agent) or via suction wands for liquid media
from an external media canister. It is not
possible to activate both systems at the
same time.
Selecting a dispensing system
The menu is saved under the following input
path.
Extended settings
Dispensing systems
Cleaning agent door
Cleaning agent canister
Rinse aid door
Rinse aid canister

08:15Dispensing systems
Cleaning
agent door
Rinse aid
door
Rinse aid
canister
Cleaning agent
canister
 
 
Only the available dispensing systems are
displayed.
 Select a dispensing system.