Miele PFD 408 - Refill Indicator; Replacing the Media Canister

Cleaning agent and rinsing agent
36
 Close the container.
 Wipe up any spilled rinsing agent thor-
oughly. This prevents over-foaming during
the next program.
Alternatively, you can start the Coldpro-
gram to rinse off any spilled rinsing agent.
Refill indicator
When the fill level in the rinsing agent con-
tainer is low, you are reminded to change
the media canister, e.g.:

OK
Change rinse aid canister. Empty
status detected.
 Confirm the prompt with OK and change
the rinsing agent canister as described.
 Fill the dispensing path (see “Machine
functions”)
Replacing the media canister
 Place the rinsing agent container (note the
color marking) on the open wash cabinet
door or on a surface which is robust and
easy to clean.
 Take the lid off the media canister and re-
move the suction wand. Place the suction
wand on the open wash cabinet door.
 Replace the empty container with a full
one.
 Push the suction wand into the opening of
the container and secure the lid. Observe
the color coding.
 Feed the suction wand into the container
until it reaches the bottom.
 Wipe up any spilled process chemical
thoroughly.