Miele PFD 408 - Activating Dispensing from the Media Canister; Deactivating Dispensing from the Media Canister

Additional settings
70
Activating dispensing from the media
canister
To activate dispensing of liquid process
chemicals from external media canisters,
you must proceed as follows.
 Start by selecting a dispensing system.
This selection is only available if the cor-
responding dispensing system is present
(depending on the model).
Cleaning agent canis-
ter
Rinse aid canister
If a rinsing agent door dispenser or a
powder dispenser is present and acti-
vated (depending on the model), when you
select Cleaning agent canister or Rinse aid
canister, you will first be asked if you want
to switch to dispensing from the media can-
ister. There is no query if dispensing from
the media canister is already activated.
Deactivating dispensing from the media
canister
You can subsequently switch dispensing
from the media canisters to the door dis-
pensers or deactivate it completely.
 Start by selecting a dispensing system.
This selection is only available if the cor-
responding dispensing system is present
(depending on the model).
Cleaning agent canister
Deactivate
Rinse aid canister
Deactivate

Deactivate “Cleaning agent
canister”?
Yes No

Deactivate “Rinse aid canister”?
NoYes
 Select OK to deactivate dispensing from
the media canister. This change will take
place immediately.
 If you do not want to change the setting,
press the button.