Operation
45
08:15
Status
Normal plus
66°C
0:19 h
Start at
Timer
12:30
Options
This activates the timer.
Selecting Delete allows you to delete the en-
tries and deactivate the timer.
You can add or switch off functions such as
AutoOpen or Dry+ for the next program via
Extras (depending on the model).
Changing the timer
If you want to change the time set for the
timer, tap on Timer and enter the start
or finish time.
Deleting the timer
Press the Start/Stopbutton.
Cancel program?
Delete Now
You will then be asked whether you want to
start the program immediately (Now) or
whether you want to delete the timer set-
tings (Delete).
Alternatively, you can tap Timer again in
the program
view and delete the timer via the settings
that follow.
Program sequence display
Once a program has started, the display
shows the program name, the name of the
current wash phase, and the time left until
the program is finished.
08:15
66°C
Normal plus
Time left
h0:45
Main wash 1
Status
Program parameters such as the actual and
target temperature can be queried during a
program sequence.
To do this, tap the colored bar in the mid-
dle of the upper edge of the display and
swipe downward.
To Next Page
Loading...
