Miele PFD 408 - Selecting a Program; Starting a Program; Starting the Program Using a Timer

Operation
44
Selecting a program
Choose your program according to the type
of wash items and the degree of soiling.
As soon as you have selected a program,
the LED for the Start/Stopbutton starts to
flash.
Use the button to return to the program
selection screen before the program starts,
e.g., to select a different program. This is no
longer possible once the program has
started. If necessary, you must cancel the
program (see “Canceling a program”).
Starting a program
 Press the Start/Stop button (the LED of
the Start/Stop button will light up).
Once it has been started, a program can
no longer be changed.
You can interrupt (see “Interrupting a pro-
gram”) or cancel (see “Canceling a pro-
gram”) the program in progress.
Starting the program using a timer
The start of a program can be delayed; for
example, to benefit from economy rates of
electricity at night. You can set a start time
at which the program should start (Start at)
or a finish time by which the program should
end at the latest (Finish at). The times are set
based on the set time of day; see “Time of
day”.
Setting the timer
 Select a program.

08:15
Program

Normal plus
66°C
AutoOpen
0:19 h
Timer
Dry+

 Tap on Timer to set the timer.
OK

08:15
Finish at
Start at
Timer
14 32
13 31
12 30
11 29
10 28
12:30
Delete
 Then select the start (Start at) or finish
time (Finish at).
 Set the time.
 Confirm your entries with the OK button.