Miele PFD 408 - Changing the PIN Code; Door Lock Code

Additional settings
74
Changing the PIN code
When a new PIN code is entered, the old
PIN code is overwritten and is perma-
nently deleted. It is therefore not possible
to reinstate the old code.
If a PIN code is lost, a new code must be
issued by Miele Customer Service.
Assign a new PIN code by selecting the
Change PIN codeoption in the menu.
 Follow the instructions on the display and
start by entering the current PIN code.

OK
08:15
2
1
0
9
8
PIN code
8
9
0
1
2
8
9
0
1
2
 Set the relevant numerical values and
confirm your input with the OKbutton.
You can cancel the process at any time by
pressing the button.
 Then enter the new code.
 Confirm the new PIN code by entering it
again.
If both entries match, the old PIN code is re-
placed by the new code.
If the entries do not match, a corresponding
message is shown on the display and the
old PIN code remains in use.
Door lock code
Opening the door during a running program
results in a program interruption. Interrup-
tions involve certain risks for the user and
can impair the cleaning result, e.g., if dirty
wash items are added. For this reason, a
door lock can be set up that requires a PIN
code to be entered if the door needs to be
opened during a program.

08:15
Cancel door lock?
Door lock code
No
Yes
 Select Yes.
Activation of the door lock, which requires a
PIN code to be entered if the door needs to
be opened during a running program.
You need to assign a new PIN code (see
“Changing the PIN code”).
Or
 Cancel the process by selecting No.
The menu disappears.