Miele PG 8583 - Page 28

Commissioning
28
Commissioning
completed
Commissioning is completed when the following message is dis-
played.
Set up successful
 Confirm the message with OK.
The machine is now ready for use.
Normal plus
Temperature
Duration
h1:30
75 °C
The settings made during the commissioning process are only
adopted after a complete program has been run.
 Select any program, e.g.: Drain.
 Press the Start/Stop button to start the program.
After commissioning, every program starts with reactivation of the
water softener.
Fault420
If the program is canceled using Fault420, all the plumbing connec-
tions are deactivated.
 Confirm the error message with OK.
 Use the button to switch the machine off.
 Wait approximately 10seconds before switching the machine on
again with the button.
The commissioning procedure starts again.
 Perform commissioning and activate at least one plumbing connec-
tion; e.g. for cold water.