Miele PG 8583 - Program Cycle Display; Program End

Operation
58
Setting the start
time
 Select a program.
 Press the OK button before starting the program.
Start time
 Use the arrow buttons(higher) and(lower) to set the hours,
and confirm your selection with the OKbutton.
When the OKbutton is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be canceled using the button
and repeated.
 Set the minutes using the arrow buttons(higher) and(lower),
and save your entry with OK.
The start time is now saved and can be changed as described at any
time up to activation of delay start.
Activating Delay
Start
 Delay start is activated with the Start/Stopbutton.
Normal plus
Temperature
Turn on at
12:30
75 °C
The selected program with the set start time set is then shown on the
display. If automatic deactivation has been selected (see “Additional
settings/Switch off after”), the machine will switch itself off after the
set time until the program start time is reached.
Deactivating Delay
Start
 Press the button or switch the machine off using the button.