Miele PG 8583 - Dispensing Systems

Additional settings
85
Dispensing systems
Up to two process chemicals can be dispensed in each wash block.
Using the following menu you can activate and vent the dispensing
system, change the name if necessary and set the dispensing con-
centration for all programs.
Activating dis-
pensing systems
Individual dispensing systems can be activated or deactivated for all
programs as follows.
 Open the menu as follows:
button
Additional settings
Dispensing system
DOS... (name of dispensing system)
DOS
Inactive
Active
- Active
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see “Program charts”).
- Inactive
The selected dispensing system is deactivated for all programs.
 Select an option using the  and  arrow buttons.
 Press OK to save the setting.