Adding and dispensing process chemicals
53
Refilling liquid
cleaning agent
Liquid cleaning agent is dispensed from an external container, e.g., a
canister.
Place the liquid cleaning agent container (blue marking) on the open
chamber door or on a surface which is robust and easy to clean.
Take the lid off the canister and remove the suction wand. Place the
suction wand on the open wash cabinet door.
Replace the empty container with a full one.
Push the suction wand into the opening of the container and secure
the lid. Observe the color coding.
Feed the suction wand into the container until it reaches the bot-
tom.
Wipe up any spilled process chemical thoroughly.
Place the container on the floor next to the machine or in an adja-
cent cabinet. The container must not be placed on top of or above
the machine. Make sure that the dispensing hose is not kinked or
trapped.
After that, the dispensing system must be primed (see “Settings /
Priming DOS”).
Checking con-
sumption
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in time.
To Next Page
Loading...
