Operation
61
Interrupting a program
The factory default setting prevents interruption of programs while
they are running. If required, this function can be activated by Miele
Service.
A program which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.
Be careful when opening the door!
The load could be hot. Risk of scalding, burning and chemical
burns.
Press the button.
You are asked if you really wish to open the door.
If the temperature in the wash chamber is above 140°F (60°C) at the
moment, it is first necessary to acknowledge the following message:
Warning! Cabinet hot.
Open anyway?
Confirm the message with OK.
Use the and arrow buttons to select Yes.
Pressing the OK button interrupts the program.
Selecting Yes interrupts the program and the door opens. The display
shows the following message:
Program interrupted:
Door opened
Rearrange the items so that they are stable and close the door.
The program continues from the point at which the interruption oc-
curred. Every program interruption is recorded in the cycle report.
If no button is pressed for several seconds, or if the process is can-
celed using the button, the display will revert to the program se-
quence display. The program is not interrupted.
To Next Page
Loading...
