Miele PG 8583 - Factory Default; Software Version

Additional settings
98
Factory default
All parameters which have been altered can be reset to their default
settings. Control parameters and program settings are reset sepa-
rately.
 Open the menu as follows:
button
Additional settings
Factory default
Reset
Reset
No
Program settings only
- No
Altered parameters are maintained.
- Program settings only
All program settings are reset.
Programs saved on free memory locations remain unchanged.
- All settings
All control parameters, including dispensing quantities and water
hardness, will be reset.
 Use the  and  arrow buttons to select an option.
 Confirm your selection with OK.
The machine reboots.
All settings
When All settings is selected and the machine is restarted, you will be
prompted to re-enter basic parameters such as the language, date,
time, water hardness, etc.
 Enter the language, date, time, and so on.
When the last entry is made, all the parameters are saved and the
factory default settings have been reset. The display changes and
shows the last selected program.
Software version
You can use this menu to view the software versions of individual ele-
ments, e.g. when contacting Miele Service.
For more information, see “Service.”