Before using for the first time
19
Removing the protective foil
and stickers
Please remove
– the protective foil from the door.
– any stickers from the front and the lid
(Exception: warning labels must not
be removed).
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
After installation
Before using the machine for the
first time, ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the filters are securely
tightened to prevent the risk of water
leaks during use.
This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.
For safety reasons, spinning is not
possible until the machine has been
prepared for use for the first time. To
activate the spinning function, you must
run a wash programme without laundry
and without additional detergent.
Using additional detergent could result
in an excessive build-up of foam.
Press the button.
Setting the language
You will be asked to select the language
you want for the display. It is possible
to change the language at any time
after setting it via "Settings".
Touch the ＜ or ＞ sensor until the
language you want appears.
Touch the sensor for the language
you want.
The language selected will be marked
with a tick and the display for setting
the Clock format will appear.
To Next Page
