Miele WMV 960 WPS - Running the First Programme

TwinDos
27
Running the first programme
The TwinDos system needs to be
primed before you can use the
washing machine.
To do this, you must run a wash
programme without laundry.
 Turn on the tap.
Make sure that the washing machine
door is closed properly.
 Touch the Programmes sensor.
 Select the Cottons programme.
First the load will appear and then the
display will change to show the
standard menu for the programme.
Cottons
Temperature
TwinDos
＜ ＞
Spin speed
rpm
Prog. manager
1:59 h
10:30
1600
60
°C
 Select TwinDos.
The display will change to show the
Degree of soiling menu.
Degree of soiling
 OK
Normal soiling
Heavy
Light
 Use the Heavy sensor to select the
Heavy soiling setting and confirm your
selection with OK.
If the Miele 2 Phase System is being
used:
 Confirm For white items by touching
the For white items sensor.
If using other detergents:
 Confirm the marked detergent by
touching the relevant sensor.
If using detergent and fabric softener:
 Confirm with the OK sensor.
 Touch the flashing Start/Stop sensor.
 Switch the washing machine off at
the end of the programme.
The TwinDos unit is now ready for use.