3. Selecting programme settings
33
ProgrammeManager
The ProgrammeManager Extra option
can be used to customise the washing
programmes to suit your requirements.
Touch the Prog. manager sensor.
Select the option you want.
ProgrammeManager is switched on.
See "ProgrammeManager" for more
information.
Extra options
You can use the Extra options to
augment the wash programmes.
Touch the Extras sensor.
Select one or several Extra options.
Confirm with the OK sensor.
The Extra option is selected.
See "Extra options" for further
information.
Stains
In order to clean stained laundry more
effectively, you can choose from a list
of various types of stains. The wash
programme will then adapt to the
types of stains selected.
Touch the Stains sensor.
Select the type of stains from the list.
You can select a maximum of three
types of stain per wash cycle.
With some stains, helpful information
will also appear in the display when
they are selected.
Confirm the information with OK.
Confirm selection of the stains with
the OK sensor.
More information may appear in the
display which must be confirmed with
OK.
The selection is saved.
Switching on Delay start
You can use Delay start to set the
finish time or the start time for a wash
programme.
Touch the Finish at sensor.
Use the – and + sensors to set the
time you want and confirm with the
OK sensor.
The Delay start time is saved. See
"Delay start" for more information.
To Next Page
Loading...
