Problem solving guide
76
The following fault message appears in the display and the
programme has been cancelled
Problem Possible cause and remedy
Drainage fault
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the filters and the pumps.
The maximum drain height is 1.8m.
Water intake fault
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
Technical fault F
There is a fault.
Start the programme again. If the fault message
appears again, contact Miele.
Waterproof system
reacted
The water protection system has reacted.
Turn off the tap.
Call Miele.
To switch off the fault messages: Switch the washing machine off with the
button.
To Next Page
Loading...
