Changing the programme sequence
53
Cancelling a programme
You can cancel a programme at any
time after it has started.
Touch the Start/Stop sensor.
Select Cancel programme.
The suds will be pumped away. The
programme is now cancelled. The door
lock will be released.
Pull open the door.
Remove the laundry.
If you want to select a different
programme:
Close the door.
Select the programme you want.
Add detergent to the detergent
dispenser drawer, if necessary.
Touch the Start/Stop sensor.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the button.
Switch the washing machine back on
with the button to continue with
the same programme.
Changing a programme and
settings
Programme
After the start of a programme, it is no
longer possible to select a different
programme.
Temperature
The temperature can be changed within
the first five minutes, except in the
Cottons programme.
Touch the Change sensor.
Touch the Temperature sensor.
Set the temperature you want with –
and + and confirm with OK.
Spin speed
Once a programme has started, you
can change the spin speed up until the
final spin begins.
Touch the Change sensor.
Touch the Spin speed sensor.
Set the spin speed you want with –
and + and confirm with OK.
Extra options
It is possible to select or deselect
certain Extra options up to five minutes
after the programme has started.
It is not possible to make any changes
to the programme or to cancel it if the
safety lock has been activated.
To Next Page
Loading...
