Programme chart
47
Outerwear Cold to 40°C Max. load 2.5 kg
Items Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER® etc.
Notes – Zip up or close jackets before washing.
– Do not use fabric softener.
– If required, these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time the
garment is washed.
Proofing 40°C Max. load 2.5 kg
Items Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes – The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Separate rinse Max. load 9.0 kg
Items For rinsing hand-washed items.
Note Reduce the spin speed for items which crease easily.
Starch Max. load 9.0 kg
Items Starching table cloths, serviettes and workwear.
Notes – Reduce the spin speed for items which crease easily.
– Laundry that is to be starched should be washed but not treated
with fabric softener.
To Next Page
Loading...
