Miller Millermatic 252 - Setting Gun Polarity for Wire Type

OM-230693 Page 19
F
Complete Parts List is available at www.MillerWelds.com
5-7. Setting Gun Polarity For Wire Type
Ref. 190821-A
1 2
34
Polarity Changeover Label Information
Always read and follow manufacturer’s rec-
ommended polarity.
1 Wire Drive Assembly Lead
2 Work Clamp Lead
3 Negative Terminal
4 Positive Terminal
Shown as shipped - Electrode Positive
(DCEP): For solid steel, stainless steel, alu-
minum, or flux core with gas wires (GMAW).
Electrode Negative (DCEN): Reverse lead
connections at terminals from that shown
above for gasless flux core wires (FCAW).
Drive assembly becomes negative.
OM-222 Page 1
allen_wrench
NGO’s
tools/
flathead philips head wrench
pliers
knife
heavy-duty workclamp light-duty workclamp wirecutter frontcutter
allen_set
needlenose
steelbrush nutdriver
chippinghammer
solderiron
stripcrimp
drill
torque wrench
socket wrench
hammer awl file
crimper
paintbrush
feelergauge flashlight ruler
toothbrush
greasegun
qtip (swab)
vicegrip
handream
punch
filterwrench
strapwrench
airgun
solvent pinextractor eprompuller pipewrench
torque screwdriver
crescent wrench
3/4, 11/16 in.