PRE INSTALLATION
ENVIRONMENTAL REQUIREMENTS
Indoor Use Only
Storage Temperature 5 °C < T < 40 °C
Operating Temperature 5 °C < T < 40 °C
Relative Humidity
Should not exceed 80% for temperatures below 31 °C
Should stay within 50% to 80% between 31 °C and 40 °C.
Altitude < 3000 metres
Installation Category II
Pollution Degree 2
3-2 OPTIONAL EQUIPMENT YOU MAY NEED
WALL MOUNTING BRACKET
The Millipore Catalogue Number for the Wall Mounting Bracket is WMBSMT001. The mounting
hardware for attaching the bracket to a wall is not included and must be supplied.
E
XTERNAL TANK CONNECTOR
The Millipore Catalogue Number for a Tank Connector Kit is TANKPECKT. An external tank holding up
to 30 Litres can be used instead of the internal 6 Litre tank. The mounting hardware for connecting the
external tank to the system is not included and must be supplied. The Millipore Catalogue Number for the
30 L PE Reservoir is TANKPE030.
- 7 -
To Next Page
Loading...
