USING THE RIOS
- 21 -
5-5 HOW TO UNDERSTAND RIOS MESSAGES
PACK ALARM
The system will prompt you to change the SmartPak using a red
Pack Alarm icon. The Display will show the red Pack Alarm
blinking. The SmartPak is changed due to either the amount of time
it has been used or from the amount of water that has passed
through it.
When the red Pack Alarm is displayed as a steady icon, the
SmartPak is not installed correctly or not installed at all. If the
SmartPak has been reinstalled and the Alarm is still displayed, then
contact Millipore.
F
LUSH: OPEN TANK OUTLET VALVE
Before FLUSH mode starts, the tank has to be emptied of water.
The FLU counter display will be blinking if the system has detected
that there is water in the tank. The Tank Outlet Valve must be
opened. The system will automatically resume FLUSH mode when
the tank is emptied of water.
To Next Page
Loading...
