MAINTENANCE
6-2 HOW TO REPLACE THE SMARTPAK
ATTENTION
Open the Tank Outlet Valve before installing
a new SmartPak. This keeps the tank from
filling until the SmartPak is rinsed out.
R
EMOVING THE SMARTPAK
Open the front cover to go into STANDBY
mode. Wait for the system to depressurize. The
Display will show STANDBY blinking for 10
seconds.
A
B
C
Press your thumbs on the system (A).
Swing the pack towards you (B).
Remove the pack from the system (C).
- 23 -
To Next Page
Loading...
