USING THE RIOS
FILLING TANK
FILLING TANK mode is displayed when the tank is
being filled with RO Water until the 100% Tank Level
display. FILLING TANK mode is launched
automatically when the Tank Level display is below the
60% level or after a FLUSH cycle has been completed.
The RO water quality is automatically displayed during
FILLING TANK mode.
T
ANK FULL
TANK FULL mode is shown when the tank was full
and has not been emptied below the 60% level. The
tank is not being filled with water.
5-4 HOW TO VIEW THE WATER QUALITY IN TANK FULL MODE
Press:
The Display will show the last RO Permeate Water conductivity value
measured during FILLING TANK mode. The water quality is
displayed for 5 seconds.
NOTE: The RO water quality is automatically displayed during FILLING TANK mode.
- 20 -
To Next Page
Loading...
