Millipore RIOS 3 - Page 40

MAINTENANCE
- 33 -
 Open the front cover to go into STANDBY mode (I).
 Let the system stand for 1 hour for effective bacteria elimination.
 (After 1 hour) Check that the Tank Outlet Tubing is secured into the drain. Open the Tank Outlet
Valve to drain all the water from the tank (J).
 Close the Tank Outlet Valve (K).
 Close the front cover (L). The system will now go into FILLING TANK mode. Let the tank level fill up
to the 100% level.
I
J
K L
Repeat steps I, J, K and L:
 Open the front cover to go into STANDBY mode (I).
 Check that the Tank Outlet Tubing is secured into the drain. Open the Tank Outlet Valve to drain all
the water from the tank (J).
 Close the Tank Outlet Valve (K).
 Close the front cover (L). The system will now go into FILLING TANK mode.
The tank is now sanitized.