Protective conductor terminal. Symbol is attached on the inside of the instrument. Information for service
personnel.
On (Power supply).
Off (Power supply).
Safety labels
Please notice the hazard points and safety symbols of the instrument. All safety labels and safety markings must
be kept clean and legible. Inspect the safety labels and safety markings regularly and replace them if not legible
or identifiable from a safe viewing distance. Contact Miltenyi Biotec for replacement labels.
Figure 1: Hazard areas and safety symbols on the front of the MACSQuant X.
Figure 2: Hazard areas and safety symbols on the rearside of the MACSQuant X.
General safety instructions
Safe operation of the instrument is no longer ensured if the instrument is not working properly and/or the
displayed instructions or messages advise you to contact Technical Support. Immediately switch off and unplug
the instrument from the power outlet and contact an authorized Miltenyi Biotec service provider or Miltenyi
Biotec Technical Support.
IMPORTANT SAFETY INFORMATION
EN
DEESFRIT
8
To Next Page
Loading...
