MIMAKI CJV30 Series User Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
8.1.1 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Operation Flow > Basic Operation > Start
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
8.1.1 Start
CJV30-100 V1.00
[REMOTE]
BOOT
CJV30-100 V1.00
P.1.0.H.1.0
When service mode is open
F/W UPDATING
 TRANSMIT START 
F/W UPDATING
 RECEIVE 
F/W UPDATING
 DOWNLOADING 
F/W UPDATING
MECA LOAD [v
 .  ]
Firmware update function
Ready for ROM data reception ROM data being received ROM data being overwritten F/W update completed
[] + []
UP&DOWNLOAD
READY!
 UPLOADING   DOWNLOADING  UP&DOWNLOAD END
POWER OFF
Parameter Up/Download
Ready for Up/Download Uploading Downloading
Up/Download successfully
completed
[REMOTE] + [END]
[] + []
SYSTEM PARAMETER
000:COMP. X = 0
System parameter input mode

MIMAKI CJV30 Series Specifications

General

Cutting Function	Yes
Interface	USB 2.0, Ethernet
Power Supply	AC 100-240 V, 50/60 Hz
Print Head	Piezoelectric Inkjet
Resolution	1440 dpi
Print Resolution	Maximum 1440 dpi
Printing Technology	Solvent Inkjet
Print Speed	Up to 17.5 m²/h
Ink Type	Solvent Ink
Ink Colors	CMYK, White
Maximum Print Width	1610 mm (CJV30-160 model)
Media Width	1372 mm (54 inches)
Media Thickness	Maximum 1.0 mm
Cutting Force	500 g
Weight	180 kg (CJV30-160 model)