Name: MIMAKI CJV30 Series
Brand: MIMAKI
Rating: 5 (1 reviews)

To Next Page

To Previous Page

1.3.7 P.1

R.1.0

Maintenance Manual > Operating Principle > Ink System > Use-up Cleaning

Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark

1.0

Rev.

1.3.7 Use-up Cleaning

 As for Use-up cleaning

 This function is available only for the 4-color ink set.

 This function is intended to use the remaining ink in the cartridge where “cartridge near end” or “cartridge ink end”

occurs during cleaning with higher priority and prevent the ink of the normal cartridge from being consumed.

 When one cartridge is a normal one at the start of cleaning, ink is sucked from the cartridge with residual ink first

and then switching to the normal cartridge takes place to continue cleaning.

 When the residual ink is used up (software counter), “INK REMAIN ZERO” error is displayed, disabling the

cartridge.

Ink use-up cleaning control is only effective in NORMAL cleaning mode. It cannot be executed in any other

cleaning mode or at initial filling.

Questions and Answers:

Need help?

Do you have a question about the MIMAKI CJV30 Series and is the answer not in the manual?

MIMAKI CJV30 Series Specifications

General