MIMAKI JV300-130 - Page 17

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2 P.10
4.2 Assembling the Stands and the Device
R.1.1
1
2
3
4
5
6
7
23. Fix the cable of the take-up device unit with the cable clamps
(x2).
INSTALLATION GUIDE > Printer Assembly > Assembling the Stands and the Device
Model JV300
Issue
2014.04.11
Revised 2014.05.08 F/W ver.
1.00
Remark
1.1
Rev.