© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1 P.7
5.1 Changing the Joints
R.1.1
1
2
3
4
5
6
7
9. Reconnect the ink route of the white ink on the circulation
pump side.
10. Put back Removed covers at the original positions.
1st pump
2nd pump
Connect to the
No. 2 cartridge.
Connect to the
No. 4 cartridge.
Cap-outer
The cartridge of white ink is at the 2nd and 4th
from the right viewing from the back of machine.
INSTALLATION GUIDE > Ink Set > Changing the Joints
Model
JV300
Issue
2014.04.11
Revised
2014.05.08
F/W ver.
1.00
Remark
1.1
To Next Page
Loading...
