MIMAKI JV5 Series Operating Manual

Machine Settings
3-34
Setting the Test Print Arrange
The orientation of test patterns that are printed when test printing is repeated can be set.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press to select [MACHINE SETUP].
4
Press the key.
5
Press to select [TestPRT.Arrange].
6
Press the key.
7
Press to select a set value.
FEED DIR. : Oriented in the media-feeding direction (rear) (default setting)
SCAN DIR. : Oriented in the media-scanning direction (lateral)
8
Press the key.
• Press the key several times to end the setting.
Media-feeding direction
: When the set value is " FEED DIR. "
: When the set value is "SCAN DIR."
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I N E S E T UP < E N T >
MACH I N E S E T UP
DEODR I ZE FAN <en t >
MACH I N E S E T UP
Tes tPRT . Ar r ange<en t >
Tes tPr i n tAr r ange
SETUP :
F EED D I R .

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English