MIMAKI JV5 Series Operating Manual

5-8
Setting Margins
The left and right margins of a medium to be printed are set.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press the key.
4
Press to select [MARGIN].
5
Press the key.
6
Press
to set the left and right margins.
Item selection : Select the left or right margin with .
Margin setting : Set the width of the margin with .
7
Press the key.
8
Press the key several times to end the setting.
Set Item Set Value Overview
LEFT 0 to 85 mm The left margin of a medium to be printed is set.
RIGHT 0 to 85 mm The right margin of a medium to be printed is set.
<LOCAL. 1> [ #01 ]
WIDTH:****mm
FUNCT I ON
COMMON SE TUP <ENT >
COMMON SE TUP
PR SETUP <e n t >
COMMON SE TUP
MARG I N < e n t >
LEFT : R IGHT
0mm : 0 mm
LEFT : R IGHT
0mm : 0 mm
Left margin:
0 to 85 mm
(by the unit of 1 mm)
Right margin:
0 to 85 mm
(by the unit of 1 mm)
COMMON SE TUP
MARG I N < e n t >

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English