MIMAKI JV5 Series Operating Manual

This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink unit etc.
Maintenance ................................................ 6-2
Precautions for Maintenance ...................... 6-2
About Cleaning Solution .............................. 6-2
Cleaning the Exterior Surfaces ................... 6-3
Cleaning the Platen ..................................... 6-3
Cleaning the Media Sensor and Register
Mark Sensor ................................................ 6-4
Cleaning the Medium Holder ....................... 6-4
Maintaining the Capping Station ............... 6-5
Cleaning the Wiper and Cap ....................... 6-6
Replacing the Wiper .................................... 6-8
Before Washing the Ink Discharge Passage . 6-
9
Cleaning the Head Nozzles ....................... 6-11
Washing the Ink Discharge Passage (PUMP
Tube Washing) .......................................... 6-13
When the Machine Is Not Used for a Long Time
(CUSTODY WASH) .................................. 6-14
Cleaning the Ink Head and the Area
around It..................................................... 6-16
When Nozzle Clogging Cannot Be
Solved ........................................................ 6-18
FILL UP INK .............................................. 6-18
DISCHARGE & WASH .............................. 6-19
Supplying the Machine with Ink Anew ....... 6-21
Preventing Nozzle Clogging When the
Power Is OFF ............................................. 6-23
Setting the Refreshing Interval in the Sleep
Mode ..........................................................6-24
Setting the Tube Washing Interval in the
Sleep Mode ................................................6-25
Setting the Cleaning Interval in the Sleep
Mode ..........................................................6-26
Setting Regular Operations...................... 6-27
Setting the Regular Wiping Operation during
a Printing Operation ...................................6-28
Setting the Refreshing Interval in the Standby
Mode ..........................................................6-30
Setting the Interval between Each PUMP Tube
Washing Operation in the Standby Mode .. 6-31
Setting the Cleaning Interval in the Standby
Mode ..........................................................6-32
Other Maintenance Functions.................. 6-34
Changing the Time When a Warning about
Wiper Replacement Is Issued ....................6-34
Setting Whether the Screen Displays the
Remaining Amount of a Medium ...............6-35
If a Waste Ink Tank Confirmation Message
Appears .....................................................6-37
Replacing the Cutter Blade ...................... 6-41
Replacing the Pinch Rollers..................... 6-43
Replacing a Cutter Blade Not Included in the
Accessories ............................................... 6-44
Chapter 6
Maintenance

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English