MIMAKI ML Tiger-1800B MKII - Other Error List: Ink Errors; Specific Other Error Codes and Solutions

71
Error
No.
Error
level
Error displayed Cause Measures
Ink
6 01 0
0601:09(ZZZZZZZZ)INK NEAR
END
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Ink in the ink tank is
low.
Ink is low.
Replace it with a new ink
tank according to the
following procedure.
1. Pull out the tank tray.
2.
Replace with a new ink
tank.
3. Return the tank tray.
4.
Execute [CLEAR
ALARM].
6 02 1
0602:09(ZZZZZZZZ)INK END
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Ink in the ink tank is
run out.
6 03 1
0603:09(ZZZZZZZZ)INK TANK
SET
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Ink tank is not
detected.
Follow the steps below to
set the ink tank.
1. Pull out the tank tray.
2. Set the ink tank.
3. Return the tank tray.
4.
Execute [CLEAR
ALARM].
6 17 2
0617:09(ZZZZZZZZ)WRONG
SUBTANK SENSOR
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Detected an
abnormality of the
sub-tank liquid level
sensor.
Turn off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
6 1A 2
061A:09(ZZZZZZZZ)INK
OVERFLOW
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Detected sub-tank
sensor Limit.
Air may have been
aspirated.
Check the remaining ink
level in the ink tank and
execute [CLEAR ALARM].
If the Alarm appears again,
contact your dealer, our
sales office, or call center.
6 1B 2
061B:09(ZZZZZZZZ)INK
SUPPLY
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Ink can not be
supplied to the sub-
tank.
Check the remaining ink
level in the ink
tank and
execute [CLEAR ALARM].
If the Alarm appears again,
contact your dealer, our
sales office, or call center.