MIMAKI ML Tiger-1800B MKII - Other Error List: Ink Pressure Errors; Specific Other Error Codes and Solutions

72
Error
No.
Error
level
Error displayed Cause Measures
6 1C 2
061C:09(________)NEGATIVE
PRESS CONTROL
Abnormal start of
negative pressure
control
Turn off the power of the
internal PC and
then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
6 1D 2
061D:09(________)NEGATIVE
PRESS NOT ENOUGH
The proper range of
negative pressure can
not be maintained.
6 1E 2
061E:09(________)NEGATIVE
PRESS OVER
6 1F 2
061F:09(________)POSITIVE
PRESS CONTROL
Abnormal start of
positive pressure
control
6 20 2
0620:09(________)POSITIVE
PRESS NOT ENOUGH
The proper range of
positive pressure can
not be maintained.
6 21 2
0621:09(________)POSITIVE
PRESS OVER
6 37 2
0637:09(______ZZ)INK LEAK
ZZ indicates an ink leak sensor.
1: Supply unit right side Ink leak
Sensor
2: Supply unit left side Ink leak
sensor
Ink leakage occurred
near the ink tank.
6 5D 2
065D:09(______ZZ)Overflowtank
ZZ indicates the chamber bottle.
1: Chamber bottles for paths 1 to
4
2: Chamber bottles for paths 5 to
8
Ink has entered the air
tank.
6 6B 2
066B:09(ZZZZZZZZ)SUBTANK
EMPTY
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
There is no ink in the
sub-tank.
Check the remaining ink
level in the ink tank and
execute [CLEAR ALARM].
If the Alarm appears again,
contact your dealer, our
sales office, or call center.
6 6D 1
066D:09(_______1)INKTANK
PULL OUT
Ink tank tray is pulled
out.
Return the ink tank tray.
Execute [CLEAR ALARM]
after returning the ink tank
tray.
6 77 0
0677:09(________)DEGAS
CONTROL
An abnormality was
detected in the
degassing control.
Turn off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.