MIMAKI ML Tiger-1800B MKII - Other Error List: Heater and FW Errors; Specific Other Error Codes and Solutions

73
Error
No.
Error
level
Error displayed Cause Measures
Heater
7 3E 2
073E:YY(______ZZ)HD HEATER
BREAK
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
The head heater is
disconnected.
Turn off the
power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
7 3F 2
073F:YY(______ZZ)HD HEATER
CTRL ERR
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
The head heater
cannot be controlled.
7 40 2
0740:YY(______ZZ)HD HEATER
TEMP HIGH
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
The head heater
temperature is high
FW
8 01 2 0801:YY(________)(C)OPCODE
An error occurred in
the control PCB.
Turn off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
8 02 2 0802:YY(________)(C)SWI
8 03 2
0803:YY(________)(C)PFTCH
ABRT
8 04 2
0804:YY(________)(C)DATA
ABRT
8 06 2 0806:YY(________)FW/SIO bit
8 07 2
0807:YY(________)FW/SIO
wbsy
8 0E 2
080E:YY(________)FW/FROM
prm
8 0F 2 080F:YY(________)FW/SIO vch
8 11 2 0811:YY(________)FW/SIO read
8 15 2 0815:YY(________)FW/SIO rsrc
8 16 2
0816:YY(________)FW/FROM
WRC
8 17 2
0817:YY(________)FW/SaveAre
a
8 1B 2
081B:YY(________)FW/STACK
OV