MIMAKI ML Tiger-1800B MKII - Other Error List: FW;PrmSave and CPU2 Errors; Specific Other Error Codes and Solutions

74
Error
No.
Error
level
Error displayed Cause Measures
8 26 2
0826:YY(________)FW/PrmSave
Buf
An error occurred in
the control PCB.
Turn off the power of the
internal PC and then the
main power of the machine
in this
order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
8 28 2
0828:YY(ZZZZZZZZ)PRG ERR
L*****
Z indicates the program address
where the error occurred.
8 29 2
0829:YY(________)FW/ERASE
TIMEOV
8 3A 2
0831:YY(ZZZZZZZZ)PARAMETE
R ERROR
ZZZZZZZZ indicates the control
data number (information for
developers).
Control data is not
registered / invalid
(Tiger).
User
9 16 2
0916:YY(________)ROM
MISSMATCH
-
Make sure that the ROM is
for the target model.
If the error occurs in the
target model ROM, contact
your dealer, our sales office,
or call center.
CPU2
B 25 2
0B25:YY(________)HDC
DIRECTION
Scan control error
Turn off the power of the
internal PC and
then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
B 27 2
0B27:YY(________)HD LOGIC
FUSE
Print head control
PCB error
B 28 2
0B28:YY(________)HD DRIVER
FUSE
B 29 2 0B29:YY(________)HD VLT ERR
B 2A 2
0B2A:YY(______ZZ)HD
HEATER FUSE
B 35 2
0B35:YY(______ZZ)HD VLT
ERR
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
HD driver voltage 26V
abnormal
B 38 2
0B38:YY(______ZZ)HD DRV
V26
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
HD driver voltage 26V
± 5% error
B 3E 2
0B3E:09(ZZZZZZZZ)PCB
LOADCELL AD
ZZZZZZZZ indicates a path
number.
1: Path 1
2: Path 2
:
8: Path 8
Load cell AD PCB
error