MIMAKI ML Tiger-1800B MKII - Other Error List: Head and MDC Mode Errors; Specific Other Error Codes and Solutions

75
Error
No.
Error
level
Error displayed Cause Measures
Head
D 0B 2
0D0B:YY(______ZZ)HD
CONNECT
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
Head connection error
Turn off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
D 0C 2
0D0C:YY(______ZZ)HD
THERMIS
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
Head temperature
error
The head temperature
specified in the head
connection check is
an invalid value.
D 0D 2
0D0D:YY(________)HDC
SPEED
Head control error
D 1C 2
0D1C:YY(______ZZ)HD BUSY
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
Cannot communicate
with the print head.
D 1D 2
0D1D:YY(______ZZ)HD CMD
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
Cannot communicate
with the print head.
D 1E 2
0D1E:YY(______ZZ)HD DRIVE
HOT
ZZ indicates a head number.
1: Head 1 (rear)
2: Head 2 (front)
The print head
detected a
temperature error.
MDC Mode_Error
C0 51 0
C051:00(ZZZZZZZZ)PRINT
MODE ERROR(1)
The print condition
has not been created
at the start of printing.
Turn
off the power of the
internal PC and then the
main power of the machine
in this order, and then turn
on again after a while.
If it appears again, contact
your dealer, our sales office,
or call center.
C0 52 0
C052:00(ZZZZZZZZ)PRINT
MODE ERROR(2)
Print preparation is
not completed at the
start of printing.
C0 53 0
C053:00(ZZZZZZZZ)PRINT
MODE ERROR(3)
Printing is not in
progress at the start
of printing.
C0 54 0
C054:00(ZZZZZZZZ)PRINT
MODE ERROR(4)
The printer is in test
mode when printing
starts.
C0 55 0
C055:00(ZZZZZZZZ)PRINT
MODE ERROR(5)
The printer is in test
mode when printing
starts.