MIMAKI SWJ-320 S4 - Page 164

© 2013 MIMAKI ENGINEERING CO.,LTD. 6.6.2 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Disassembly and Reassembly > Pressurizing relations > Plural solenoid valve assy.
Model SWJ-320S Issued 2012.07.19 Revised F/W ver Remark
1.0
Rev.
6.6.2 Plural solenoid valve assy.
 Work procedures
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the cover LR.
3. Remove the screw, and remove the BKT.
4. Disconnect the connection connectors.
5. Unscrew the screws on the upper surface of bracket, and
remove the solenoid valve assy.
6. Disconnect the air tubes (2 positions) arranged in the solenoid
valve assy.
7. Reverse the disassembly procedure for reassembly.
Plural solenoid valve assy.
Backside of machine
4 3 2 1
Air tank sensor assy.
Bracket
screw(x2)
Connector 1
Val v e 1
234
In case of the replacement of plural solenoid valve
assy., make some marking to the connection con-
nectors and the air tubes, and connect them cor-
rectly.
screw(x2)