MIMAKI SWJ-320 S4 - Page 50

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.1 P.2
4.2.1 HEAD ADJUST
R.1.1
1
2
3
4
5
6
7
8
 Head Adjusting Flow with [AVERAGING.ADJ.]
Tilting/Stagger
position/Front and back position
of all heads are within
acceptable range
?
To Carriage base tilting
adjustment (4.2.2)
START
OK
Pattern print
(AVERAGING)
Head most
slanting to right is within
acceptable range?
Nozzle check
Dot missing or blurred?
Test Pr i n t
To PRINT ADJUST (4.2.8)
Head cleaning
NG
OK:All heads
NG:Stagger/ Forward/
backward position
NG: Tilt
Yes
No
To Head tilting adjustment
(4.2.3)
To Stagger/Front and back
adjustment (4.2.4)
Head adjustment acceptable range (Displacement amount on
averaged adjustment patterns)
Head tilt: Within 0 ± 10um
Stagger/Front and back: Within 0 ± 10um
MAINTENANCE MANUAL > Adjustment > Adjustment Items > HEAD ADJUST
Model SWJ-320S Issued 2012.07.19 Revised 2013.03.08 F/W ver 2.20 Remark
1.1
Rev.